U.S. Industrial Production Falls 0.4% in October Despite Manufacturing Growth

Utilities and mining pulled down October output even as automakers lifted manufacturing; overall industrial capacity use slipped to 76.4%.

John Miller
Written by John Miller
Published
Share

U.S. industrial production fell 0.4% in October after rising 0.7% in September, as lower output from utilities and mining outweighed a gain in manufacturing. The decline, reported by the Federal Reserve on November 17, interrupted the previous month’s increase in overall industrial activity without reversing its year-over-year growth.

Manufacturing production rose 0.3%, led by a 4.4% increase in motor vehicles and parts. Excluding that industry, factory output edged down 0.1%. Utilities output fell 4.3%, and mining production decreased 0.8%, leaving a noticeably weaker result for the industrial sector as a whole than the manufacturing headline suggested.

At 103.4, the overall production index was below September’s revised 103.8, with 2017 set to 100. Even after the October setback, industrial output remained 2.1% above its level a year earlier. The difference between the monthly drop and the annual increase is important: output was lower than in September but still higher than in October 2025.

The Federal Reserve’s G.17 report tracks production in manufacturing, mining and electric and natural gas utilities. It does not cover the entire U.S. economy, and its factory data should not be confused with sales, new orders or employment figures. In October, movements outside manufacturing were decisive for the direction of the overall index.

Utilities and mining pull down the headline index

Utilities recorded the steepest decline. Their output fell 4.3% after increasing 4.4% in September, almost reversing the previous month’s rise. The Fed reported decreases in both electric and natural gas utility output. The release did not identify a single cause for the change, so the figures alone do not establish how much of the reversal was related to weather, demand or other operating conditions.

Utilities’ production index stood at 111.7 in October, down from 116.7 in September. That move matters to the overall industrial reading because utility activity is included alongside factory and mining output, even though changes in electricity or gas production do not necessarily convey the same information about factory business conditions as changes in manufactured goods.

Mining also weakened. Its production index fell 0.8% in October after a 0.2% decline in September. On a year-over-year basis, however, mining output was 2.4% higher. As with total industrial production, the monthly setback and the annual comparison describe different time horizons rather than conflicting results.

Output destined for several major uses declined as well. Consumer goods production fell 0.7%, materials output dropped 0.7%, and construction supplies decreased 0.4%. The materials decline included a 2.2% fall in energy materials. These categories provide a wider view of industrial output than the three headline industry groups, although they reorganize the same production data by market use rather than creating separate measures of activity.

Automakers account for much of the factory gain

Within manufacturing, durable goods output increased 0.5%. The standout was motor vehicles and parts, where production rose 4.4%. That increase was large enough to lift the overall manufacturing index despite a slight decline in manufacturing excluding vehicles and parts. It would therefore overstate the breadth of factory strength to describe the October manufacturing result as a uniform expansion across industries.

Nondurable manufacturing output was unchanged. Gains in plastics and rubber products, along with food, beverage and tobacco products, were offset by declines in the other nondurable manufacturing groups covered by the release. The flat result contrasted with the improvement in durable goods, leaving the composition of manufacturing growth uneven.

Factory output reached an index level of 98.7 in October, up from 98.4 in September. It was 2.2% higher than a year earlier, slightly above the 2.1% annual increase for industrial production overall. Those figures show that manufacturing continued to post positive annual output growth even as its month-to-month gain relied heavily on the automotive category.

Business equipment production rose 1.0%, and defense and space equipment output increased 0.9%, showing some strength away from consumer goods. By contrast, business supplies declined 0.3% and construction supplies fell 0.4%. These are classifications of what industry produces, not direct evidence about the causes of changes in customer spending or future orders.

Consumer products were similarly divided. The automotive products component of consumer goods rose 3.0%, supporting durable consumer goods, but declines in nondurable energy and non-energy goods more than offset that improvement. The resulting 0.7% drop in total consumer goods production helps explain why a rise in vehicle output did not translate into stronger production across every major market category.

Capacity use weakens ahead of Fed data revision

Industrial capacity utilization, which measures how much of the sector’s productive capacity was being used, fell to 76.4% from a revised 76.8% in September. It was 3.0 percentage points below the long-run average of 79.4% recorded for 1972 through 2025.

Capacity use moved differently across industries, mirroring their output results. Manufacturing utilization edged up to 76.0%, still 2.2 percentage points below its own long-run average. Mining utilization declined 0.8 percentage point to 86.4%, while utilities utilization fell 3.3 percentage points to 70.2%. The utilities rate remained far below its 84.0% historical average.

A rise in production does not necessarily mean that factories are operating close to their estimated capacity. Nor does a sharp drop in utility output signal equivalent weakness in manufacturing. October’s factory improvement left the broader industrial sector well below its long-run utilization norm.

Earlier monthly figures changed in the same release. The September industrial production index was lowered to 103.8 from the previous estimate of 104.0, while August’s reading was revised to 103.1 from 103.3. October’s figures are marked preliminary, so comparisons should be read with the usual scope for subsequent data changes.

The Federal Reserve plans to publish its annual industrial-production and capacity-utilization revision on November 24, 2026. The update will shift the index base year from 2017 to 2022 and incorporate new manufacturing benchmarks from the Census Bureau for 2023 and 2024, along with revised monthly indicators and seasonal factors. That release will provide the next official test of the current historical figures, including the context for October’s decline.

John Miller

About the author

John Miller

Economics Contributor

John Miller writes about the economic forces behind markets and financial decisions. He covers inflation, interest rates, employment, supply and demand, public policy and the channels through which economic changes affect investors, borrowers and households.

View author profile